This section includes
        hints, tips and questions and answers regarding the GAAR 2013 
		specifically.  The GAAR Forum is provided for more interactive discussion on the subject and as an area to
        seek more specific advice.  General questions from the Forum will be placed here, as
        considered appropriate.Aircraft
        Selection Considerations:
        - any piston or radial engined aircraft.
        - range of at least 400 nm;
        - fitted with ADF and VOR is ideal;
        - if not fitted with ADF and VOR, ADF is recommended, otherwise most of the event has to
        be flown by "dead reckoning";
        - fitted with DME would also be good, but not absolutely necessary;
        - suited for sealed and unsealed runways; and
        - altitude performance (up to 10,000 ft).
        Route Information:
        - 10 Legs (some with sub sectors); and
        - total event distance of 1505 nm.
        Q1.  What is the GAAR?
        A1.  The GAAR is the Great Australian Air Rally and is an
        event for flight simulation enthusiasts conducted by Bluegrass Airlines as part of the
        Great Air Rally Grand Prix series.
        Q2.  Who can participate in the GAAR?
        A2.  The GAAR is open to flight simulation pilots of all skill
        levels, from the novice to the more experienced pilots.
        Q3.  What fight simulator is used for the GAAR?
        A3.  The GAAR is officially supported in FS9 and FSX.
        Q4.  Can I use another flight
        simulator?
        A4.  Yes, but it will not be supported with the required files.
        Q5.  What aircraft can I fly in the GAAR?
        A5.  
        Any radial or other piston engined aircraft that flew in the period 
		1930's to 1950's.  This includes any subsequent production models, 
		e.g. Cessna 172 - first flew in 1956 (therebt making it eligible) with 
		current production models being the 172R and 172S (or 172SP).   
		A model variant will only become ineligible if it compromises the rule 
		on engines, i.e. fitted with a turboprop, turbojet, turbofan and other 
		such engine.
        Q6.  Can I fly multiple aircraft in the GAAR?
        A6.  Yes, but you must submit a separate Pilot Registration for each
        aircraft entered.
        Q7.  How is the competition
        run?
        A7.  The GAAR is not a race nor a competition.  It is an event
        in which individuals participate against their own flying ability by navigating over a
        series of Flight Legs on which they are aiming to fly as close as possible to an
        individually calculated "target time".
        Q8.  Why do some Flight Leg
        distances appear to have large distance and navigation errors when I do my flight
        planning?
        A8.  The Flight Legs are not always flown "as the crow
        flies" (straight line).  Detailed navigation instructions are provided 
		in the Event and Flight Briefing documents available from the 
		"Downloads" page.
        Q9.  I have other commitments
        during the event's official conduct period that will interfere with participating, can I
        fly the event in advance?
        A9.  Yes, you can.  Required flight briefings and flight
        situation files will be available for download from 15 Jan 13 and you can submit PIREPS
        from 00:01 hrs UTC, 01 Feb 13.
        Q10.  Can I fit "ferry
        tanks" to my chosen aircraft?
        A10.  Yes, an aircraft may be fitted with "ferry tanks" to
        effect a minor increase in the range of the aircraft.  Where "ferry tanks"
        are used, the total aircraft weight must remain inside the specified maximum take-off
        weight (MTOW) for the aircraft.
        Q11.  How is my "target time"
        calculated?
        A11.  The "target time" is based on the "Test Flight
        Time".  It is applied to the distance for each respective Flight Leg with
        elements factored in for the various stages of flight, Climb, Cruise, Descent and
        Circuit.  The Climb component factors in a reduced speed and distance covered, as
        does the Circuit component, which is based on a combined Downwind, Base and Final Leg of
        approximately 12 nm.